The Sykes range of electric submersible wastewater pumps are hardwearing, precision engineered pumps designed to deal with the challenges in wastewater treatment plants, whether emergency or planned, short-term or long-term. Flow rates of up to 440 litres per second and heads of up to 71 metres.
Piranha S21/M30/M70
ViewNX3085 SH
ViewXFP80C CB1.2
ViewAFPK0841 (1.95kW & 3kW)
ViewAFPK0832 / CS3102
ViewAFPK0842 / AFPK0844
ViewNX3102 SH
ViewXFP80E-CB1.3
ViewAFPK1042 (4kW & 6kW)
ViewXFP100E CB1.1
ViewAFPK1043 Max flow 35l/s
ViewAFPK1045 Max flow 65l/s
ViewAFPK1048
ViewAFPK1049 / AFP1049
ViewNX3153 SH
ViewXFP100J CB2.315
ViewXFP150G-CB1.3
ViewAFPK1543
ViewNX3171 SH
ViewAFPK1552
ViewXFP150M CB2.450
ViewAFPK1575
ViewAFPK2045
ViewAFPK2073
ViewCS3152-LT Max flow 260l/s
ViewXFP301M
ViewSludge Pumps
View- Wide range of units to choose from
- Suitable for a variety of wastewater applications
- ATEX-rated motors for Zone 2 environments
- Cost effective, efficient pumping
- Solids handling impeller design
- From 2kW to 75 kW
- Flow rates up to 440 l/s
- Heads up to 71m
- Genuine 24/7 service
- Low maintenance and disruption free
- Wide range of control equipment available
- Full range of compatible accessories
The Sykes range of wastewater pumps are smooth, quiet running, vibration free units which are cost effective in their use and ideal for the demands of the hostile environments in which they are used. Manufactured with a cast iron casing, they are robust units capable of dealing with the rigours of the wastewater treatment process.
During routine servicing or repair, customers’ permanent pumps either need temporary support or have to be taken offline. The Sykes sewage range can be used whatever the requirements. Flow rates up to 440 l/s are held as standard in the hire fleet and discharge sizes up to 300 mm ensures that the pumps can be connected to existing systems.
Automatic level controls mean that the pumps only operate when the flow requires it but fitted with the IE3 Premium efficiency motors, running costs are kept to an absolute minimum even if the pumps need to run continuously. Another feature of the motors is that they are ATEX-rated explosion-proof suitable for ’Zone 2’ hazardous areas allowing them to be placed in any location within the treatment works.
Should the pumps be needed to be used with installed guide rail systems then they can be adapted to fit with most pumps stools. The contra block impellers used in the Sykes submersible sewage pumps allow them to deal effectively with the solids typically found in wastewater. Additionally, the units can be fitted with cooling jackets which allows them to be used for “in line” dry installed applications.
With our experience of the wastewater sector we are able to offer electric submersible pump hire for all applications associated with the water industry. If a site needs a visit from one of our highly experienced team, we are happy to offer their time and expertise free of charge to ensure that the correct pump is selected.
In addition to the range of sewage submersible pumps for hire we offer accessories including starter panels and variable speed drives.