I'm Looking For For My
You are here: Home > Pumps > Submersible Sludge Pumps > JS750SV 110v
  • Full Details
  • Features / Environments
  • Specifications

The Sykes JS750 electric submersible sludge pump delivers a maximum flow of 6l/s at a head of up to 9.5m. Constructed from cast iron and stainless steel with a vortex flow impeller, this robust pump weighs just 25.4Kg.

These pumps are ideal for wastewater handling and dewatering at all kinds of construction sites - from the smallest building project through to power stations, utility processes, manufacturing and wastewater industries. Their easy handling, small size and excellent capacity make them ideal for manhole emptying and bypass pumping, amongst many other uses. When equipment is out of commission or additional capacity is required, water utility companies use these units for forward pumping in their process and return pumping for RAS and other light sludges within their treatment process.

Fitted with 20m of cable and a 32A 4 pin 110V appliance inlet, this pump is ready for plug and pump. The integral float ensures that the pump only runs when the water level requires, avoiding waste energy.

Our sludge pumps require minimal maintenance, providing trouble-free pumping for months on end. This vital characteristic means that for most applications the pumps do not need to be disturbed for the duration of the scheme. When used with a Sykes control panel the pumps can also benefit from additional overload protection.

  • Cast iron and Stainless steel body
  • Cast Iron vortex impeller
  • High wear resistance
  • Highly reliable
  • No vibration - smooth running
  • Integral float control
  • Built in motor protection
  • 3” Discharge
  • Solids handling up to 40mm dia.
  • Standardized design for minimal service and maintenance
  • Light -weight materials for easier portability
  • Simple installation
  • High head and high volume versions
  • Plug and pump
  • Small size for access in to confined areas
  • 110V, 0.75kW motor
  • Low noise and no fumes
  • Max Head 9.5metres
  • Max Flow 6 litres/sec.
  • Building site drainage and wastewater diversion
  • Effluent control
  • Clean and dirty water pumping
  • Tunnelling
  • Dirty and nuisance water pumping
  • Wastewater process systems
  • Industrial processes
  • Food, fruit and Vegetable preparation processes
  • Power Stations
  • Agriculture
  • Utility industries
Weight (kg)
Dimensions (mm)
(HxLxW)mm: 530 x 340 x 170
Motor Type (V)
110v 50Hz
Discharge Spigots
3” Bauer
Motor Rating (kW)
Cable termination
32A 4 pin appliance inlet (plug)
Max Power Input (kW)
Cable length
Running Current (Amps)
9.0 Amps

Similar Submersible Sludge Pumps Units That You Might Consider

SP 20 Submersible sludge pump
SP 20 Max flow 10l/s
SP 30 Submersible sludge pump
SP 30 Max flow 18l/s
SP 50 Submersible sludge pump
SP 50 Max flow 25l/s
SP 80 Submersible sludge pump
SP 80 Max flow 30l/s