I’m Looking For For My
You are here :   Home > Heating > Direct Fired Oil Heaters > MODEL 40 230 V 
Request Call Back

The Model 40 is a Direct Fired oil heater, designed for use in well-ventilated areas. The Model 40 can be fuelled by either Gas oil or Kerosene and available with either 230 or 110 volt electric supply. The Model 40 is very reliable and delivers large volumes of warm air quickly and safely.

For spaces big or small?

The Model 40 will warm an area of 1,050m3 - 37,000 ft3

The Model 40 dimensions are 560 x 930 x 615mm and weighs 37kg

Features
  • Safe and easy to use
  • Direct fired
  • Economical
  • Totally portable
  • Very reliable
  • Runs on low cost fuel
  • Quiet in operation
  • 12 hours heating on one 46 ltr tank
  • Delivers large volumes of warm air
Environments
  • Factories
  • Garages
  • Warehouses
  • Farm buildings
  • Loading bays
  • Construction sites
  • Sports Halls
Nominal heating duty
43 kW 146716 btu
Fuel Consumption
4.6 l/h
Air flow (max)
1050 m3/h
Typical heated area
1050 m
Power supply
230/100V 1 ph 50 Hz Run 2/4.1 A
Fuel type
Gas Oil or Kerosene
Noise level (max)
79 dBA @ 1 metre
Tank capacity
46 litres
Weight (kg)
37 kg
Dimensions (L x W x H)
930 x 560 x 615 mm
Plug type
BS1363 230v / BS4343 16A 110v
Control
Automatic External Controls Available
  • RCD
  • 230V / 110V 3KVA CONTINIOUS TRANSFORMER
  • 10M x 230V EXTENSION LEAD 2.5MM DIA
  • 20M x 230V EXTENSION LEAD 2.5MM DIA
  • 10M x 110V EXTENSION LEAD 2.5MM DIA
  • 20M x 110V EXTENSION LEAD 2.5MM DIA
  • GAS OIL
  • T16 THERMOSTAT C/W 10M CABLE

Similar Direct Fired Oil Heaters That You Might Consider

OTHER CATEGORIES

Model 40 direct fired oil heater
MODEL 40 43kW
Tornado
Tornado