I’m Looking For For My
You are here :   Home > Heating > Direct Fired Oil Heaters > MODEL 30 110 V 
Request Call Back

The Model 30 is a Direct Fired oil  heater, designed for use in well-ventilated areas. The Model 30 can be fuelled by either Gas oil or Kerosene and available with either 230 or 110 volt electric supply. The Model 30 is very reliable and delivers large volumes of warm air quickly and safely.

For spaces big or small?

The Model 30 will warm an area of 675m3 - 23,827 ft3
The Model 30 dimensions are 485 x 860 x 530mm and weighs 31kg

Features
  • Safe and easy to use
  • Direct fired
  • Economical
  • Totally portable
  • Very reliable
  • Runs on low cost fuel
  • Quiet in operation
  • 11.3 hours heating on one 30 ltr tank
  • Delivers large volumes of warm air
Environments
  • Factories
  • Garages
  • Warehouses
  • Farm buildings
  • Loading bays
  • Construction sites
  • Sports Halls
Nominal heating duty
28 kW 20472 btu
Fuel Consumption
2.6 l/h
Air flow (max)
500 m3/h
Typical heated area
675 m
Power supply
230/110V 1 ph 50 Hz Run 1.6/3.35 A
Fuel type
Gas Oil or Kerosene
Noise level (max)
73 dBA @ 1 metre
Tank capacity
30 litres
Weight (kg)
31 kg
Dimensions (L x W x H)
860 x 485 x 530 mm
Plug type
BS1363 230 V BS4343 16 A 100V
Control
Automatic External Controls Available
  • RCD
  • 230V / 110V 3KVA CONTINIOUS TRANSFORMER
  • 10M x 230V EXTENSION LEAD 2.5MM DIA
  • 20M x 230V EXTENSION LEAD 2.5MM DIA
  • 10M x 110V EXTENSION LEAD 2.5MM DIA
  • 20M x 110V EXTENSION LEAD 2.5MM DIA
  • GAS OIL
  • T16 THERMOSTAT C/W 10M CABLE

Similar Direct Fired Oil Heaters That You Might Consider

OTHER CATEGORIES