I’m Looking For For My
You are here :   Home > Heating > Indirect Fired Oil Heaters > ID60 (60kW) 
Request Call Back

This particular model of heater is able to operate efficiently while consuming 6.98l/h of fuel on average. With a nominal heating duty of 60kW, the unit’s maximum air flow (3,060m³/h) ensures areas up to 1,500m³ in size can be sufficiently warmed.

The ID60 runs on gas oil or kerosene oil and is available in either an 110V or a 230V power supply. Weighing 58kg, this wheel-mounted product can be effortlessly relocated whenever necessary, making it ideal for a wide range of applications.

Once stationed in a selected area, the heater can be commissioned almost instantly and is available with an external thermostat if desired.

  • Safe and easy to use
  • Delivers large volumes of warm air
  • Robust construction
  • Very reliable
  • Quiet operation
  • Fume free
  • Economical
  • Totally portable
  • Runs on low cost fuel
  • Building Sites
  • Warehouses
  • Garages
  • Retail and car showrooms
  • Food prep areas
  • Exhibition halls
  • Clothing manufactures
  • Marquees
  • Sports halls and leisure centres
  • Factories
  • Churches
  • Agricultural Locations
Nominal heating duty
60 kW 204720 btu
Duct size
2 x 300 mm
Air flow (max)
3060 m3/h
Fuel Consumption
6.98 l/h
Power supply
230/110V 1 ph 50 Hz Run 6.2/15.1 A
Typical heated area
1,500 m3
Noise level (max)
73.3 dBA @ 1 metre
Fuel type
Gas Oil or Kerosene
220 kg
Dimensions (L x W x H)
1500 x 755 x 1025 mm
Automatic External Controls Available
Flue size (min)
1 mt x 127 mm
Plug type
BS1363 230 V / BS4343 16 A 100V
Fuel tank
Remote fuel tank required
Duct length (max)
30 metres

Similar Indirect Fired Oil Heaters That You Might Consider


ID35 (25kW)
ID 65DV indirect fired oil heater
ID65 DV (65kW)
Aurora FH111 DV 110kW
Aurora FH111 (110kW)
Aurora FH 185 Indirect Fired Oil Heaters
Aurora FH185 (193kW)
Aurora IMAC 2000S Indirect Fired Oil Heaters
Aurora FH2000S (200kW)
Aurora FH 4000 Indirect Fired Oil Heaters
Aurora FH4000 (383kW)